We recently had the pleasure of supplying one of our regular customers with some custom cut runs of 3528/120/3000K strip at a rating of 9.6w/m. This was to help enhance an incredible wall unit. We were tasked with supplying 12 x 300mm cuts and 2 x 625mm cuts complete with custom cut tails to run back to a 75w mains dimmable driver which was to control light output on the lot. The installation was executed perfectly and by all accounts the customer was delighted. If you have a

A new batch of controllers have arrived, this is our simple RF RGB touch remote controller, a very reliable piece of kit that we have had since day one. It can find the RF signal from up to 20m away. With a generous capacity of 6a per channel you will have no problem running multiple runs of up to 30m of our standard colour change strip off this bit of kit. It is very compact also meaning you won't have any trouble funding a suitable place to house it.

We think this job is a great example that if you get the colour of light right against the colour schemes in the environment your putting your LEDs, then you don't have to use the brightest LEDs in the world to get the effect you desire. You will be surprised how much the light can carry. Here we have multiple runs of standard 4.8w/m Warm White in IP67, these were custom cut and sealed to specified lengths along with pre soldered custom cut power tails to run back to the driv